Pacific RL120 Water Cooling Kit
Pacific RL120 Water Cooling Kit

Pacific RL120 Water Cooling Kit

Out of stock
P/N
CL-W069-CA00BL-A
AU$275.00

A LCS combo unit includes water block, PR15 pump and reservoir, 120mm radiator, fittings, PWM curve fan, tube, coolant, and other accessories.

Thermaltake Pacific RL120 Water Cooling Kit

As part of its ‘hardcore’ spirit towards the ultimate in custom PC water cooling, Thermaltake has launched the new Pacific RL120 Water Cooling Kit. A LCS combo unit, the kit consists of one CPU water block, one PR15 pump and reservoir, one 120mm radiator, six compression fittings (chrome), one PWM curve fan, tube, blue coolant, and other accessories. Together, these provide exceptional performance, unrivalled reliability, and styling to DIY enthusiasts.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

Pacific W1 CPU Water Block

The W1 CPU water block is constructed with a copper base and anti-corrosive nickel plating to provide exceptional heat transfer and cooling performance. Fits all modern CPU sockets.
Learn More

Pacific PR15 Reservoir/Pump Combo

The PR15 includes a 200ml reservoir and P500 pump to provide the perfect combination for proper water cooling circulation and capacity, manufactured from high quality POM and PMMA material.
Learn More

Pacific RL120 Radiator

With high-density fin design (FPI: 14), the 120mm radiator is optimized to accommodate high airflow and high air pressure with increased capacity and provides superior cooling performance to all components.
Learn More

Pacific 1/2” ID x 3/4” OD Compression Fittings (Chrome)

Six durable brass compression fittings allow proper connection to G1/4” ports to properly secure to cooling components.
Learn More

120mm PWM Curve Fan

A 120mm PWM fan maximizes the cooling performance and tranquility with speed up to 2000RPM, minimizing any overheating possibility.
Learn More

V-Tubler 4T

The V-Tubler 200cm ID 1/2” (13mm) water tube provides custom PC water cooling configurations with flexibility and durability from end to end.
Learn More

Coolant 1000 Blue

Eco-friendly pre-mixed red coolant for custom PC water cooling configurations; prevent corrosion, rust and scaling across every component for a total system solution.
Learn More

Remarkable Expansion

The Pacific RL120 water cooling kit provides multiple LCS components for users to build the ultimate in custom configuration, allowing enthusiast to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W069-CA00BL-A
Dimensions
97.5(L) x 84 (W) x 289.4 (H)

Components Dimension
Pump&Reservoir: 97.5(L) x 84 (W) x 289.4 (H)
Radiator : 282.5 (L) x 129 (W) x 64 (H)

Tube Dimension
OD : 3/4” ( 19 mm ) : ID : 1/2”( 13 mm )
Weight

5.8

Compatibility Intel LGA 2011/1366/1155/1156/1150/775 AMD FM2/FM1/AM3+/AM3/AM2+/AM2
Coolant Color:Blue
Kit Contents CPU Water Block
- Pacific W1 CPU Water Block x1
Pump/Reservoir
- Pacific PR15 Pump/Reservoir Combo x1
Radiator
- Pacific RL120 Radiator x1 (162.5 (L) x 129 (W) x 64 (H) )
Fittings 
- Pacific 1/2'‘(12.7mm) ID x 3/4'‘(19mm) OD Compression (Chrome) x6
Fan
- 120mm PWM Curve Fan x1
Tube
- V-tubler 4T 1/2'‘(12.7mm) ID x 3/4'‘(19mm) OD
Transparent Tube x2 Meters
Coolant
- Coolant 1000 Blue 1000cc x1 
Accessory
- Intel and AMD Universal Backplated & Mounting Kit
- 24pin ATX Bridge Tool x1
- Thermaltake Thermal Grease x1

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date
  • Manual
  • Multi-language
  • 9.8 MB
  • 2015-08-10